เครื่องตัดไวนิลป้อนม้วน RC-720

Compatible software.

VICUT RC vinyl cutter matches with both Signmaster(from Australia) and Signcut PRO2 (from Sweden) S/W. Users can choose both according their use habit.

Moving carriage.

Steel frame with linear bearing, it is with more cutting pressure which is adjustable easily, and it is good in heat dispersion. With built-in high resolution CCD camera, it can scan the multiple mark points automatically to realize contour cutting function.  

Steel thorn and pressure roller.

The plotter equipped with steel thorn which can fix media effectively to avoid any sliding and ensure the feeding precision. There are several pressure rollers on up side of beam,the distance between each roller can be adjusted to fit for different size media. These high precision imported rollers, assures no offset feeding long distance.

Control panel.

User-friendly control panel with English display screen, the back-lit LCD and large gel buttons ensure simple and comfortable usability.

Multiple interface.

There are three methods of file transmission,U-disk, network interface and USB cable. U-disk provides convenient offline working, network interface allows plotter connecting with LAN, so that one computer can handle several machines simultaneously, and USB cable is very useful for online connecting when users’ computer only equipped with USB interface.

Suction holes.

With many suction holes on the cutter working table, material can be fixed tightly,avoid bulging of materials during processing.

Paper feeding system.

Auto feeding system, easy to feed the roll material, smooth and fast.

Paper pressing device.

There is a row of paper pressing devices behind the plotter beam. During the working process, these paper presses can well fix the materials, ensure that the materials move within the fixed range and reduce the offset.

Press bar.

After loading the material, pull down the handle to press the material, so that the material can be fixed during the paper feeding process and reduce the offset.

Graduation.

The graduations are marked on the paper feeding side of the working platform. So that the material size can be easily measured and adjusted when feeding the material.

Catch-up basket.

The machine equipped with a set of catch-up basket including 2pcs holding rollers and one piece of high quality nylon cloth bag, save space while keeping materials clean and tidy.

Switch on button & power interface.

Switch on and off easily with a press button after connecting the power cable with plotter. We offer various worldwide standard power plug. The voltage is also can be customized due to customer needs.

Network interface.

A, stable communication over long distance.

B. Control one plotter from multiple computers.

C. Control different plotters from one computer.

Calibration Tool(Pen & holder)

Used at set up and then periodically, to calibrate the cutter.

Roland compatible 30 degree cutting blade.

Roland Cemented Carbide Blades 30 degrees, Knifepoint Offset 0.25. Good for thicker media or smaller character

Roland compatible 45 degree cutting blade.

Roland Cemented Carbide Blades 45 degrees, Knifepoint Offset 0.25. A lower angle (45 degree) is great for thin materials, and its suitable for almost all kinds of materials in practical use.

Roland compatible 60 degree cutting blade.

Roland Cemented Carbide Blades 60 degrees, Knifepoint Offset 0.25. A steeper angle (60 degrees) has a more vertical cutting orientation that penetrates deeper.

Replaceable Cutting strip.

Replace your cutting strip every 6 months to a year depending on your usage. Gouges or adhesive residue on the strip can accumulate over time and usage and cause tracking errors on your cut job.